How to upgrade the firmware of Sun server X4270
1. Log in to the ILOM SP web interface or the CMM ILOM web interface.
2. Select System Information -->Versions
3. Poweroff the sewrver
4. Select Maintenance --> Firmware Upgrade.
5. Click Browse to select the location of the firmware image you want to install.
6. Click the Upload button to upload and validate the file. Wait for the file to upload and validate. The Firmware Verification page appears.
7. In the Firmware Verification page, enable any of the following options:
a. Preserve Configuration. Enable this option if you want to save your existing
configuration in ILOM and restore that existing configuration after the update process completes.
b. Delay BIOS upgrade until next server poweroff. Enable this option if you
want to postpone the BIOS upgrade until the next time the system reboots.
8. Click Start Upgrade to start the upgrade process or click Exit to cancel the process. When you click Start Upgrade the upload process will start and a prompt to
continue the process appears.
9. At the prompt, click OK to continue. The Update Status page appears providing details about the update progress. When the update indicates 100%, the firmware upload is complete.
When the upload completes, the system automatically reboots.
10. Reconnect to the SP (or CMM) ILOM web interface. Select System Information --> Version to verify that the firmware version on the SP or CMM corresponds
to the firmware image you installed.
2. Select System Information -->Versions
3. Poweroff the sewrver
4. Select Maintenance --> Firmware Upgrade.
5. Click Browse to select the location of the firmware image you want to install.
6. Click the Upload button to upload and validate the file. Wait for the file to upload and validate. The Firmware Verification page appears.
7. In the Firmware Verification page, enable any of the following options:
a. Preserve Configuration. Enable this option if you want to save your existing
configuration in ILOM and restore that existing configuration after the update process completes.
b. Delay BIOS upgrade until next server poweroff. Enable this option if you
want to postpone the BIOS upgrade until the next time the system reboots.
8. Click Start Upgrade to start the upgrade process or click Exit to cancel the process. When you click Start Upgrade the upload process will start and a prompt to
continue the process appears.
9. At the prompt, click OK to continue. The Update Status page appears providing details about the update progress. When the update indicates 100%, the firmware upload is complete.
When the upload completes, the system automatically reboots.
10. Reconnect to the SP (or CMM) ILOM web interface. Select System Information --> Version to verify that the firmware version on the SP or CMM corresponds
to the firmware image you installed.
Comments
Post a Comment