Oracle FS1 Flash Storage System Help Desk Support Consultant
1. Which two (2)
statements about a Pilot are true? (Select two)
It runs the FS1 software. (*)
It has no connection to the Controllers.
It is responsible for initiating a Call-Home. (*)
It is physically connected to one or more of the Disk
Enclosures.
2. How is FS1
MaxMan configured to monitor a particular set of FS1 Storages?
No configuration is necessary. All FS1 Flash Storage Systems
are automatically displayed in MaxMan.
Create a list of FS1 Flash Storage Systems under the
Configuration tab and save it in the Managed Hosts navigation folder.
Define a list of FS1 Storage Systems and save it to a file
on the local host. (*)
Browse for available FS1 Flash Storage Systems and add them
to a list in the ASSM GUI.
3. Which two (2)
tasks can an "Administrator 1" account do that an "Administrator
2" account cannot do? (Select two)
Shut down the FS1 (*)
Perform Guided Maintenance
Create an iSCSI LUN
Modify NDMP settings (*)
4. Which task is
the FS1 MaxMan GUI not able to perform?
View recent events on all FS1 Flash Storage Systems
Configure a new LUN on a specific FS1 Flash Storage System
(*)
Monitor LUN performance on all FS1 Flash Storage Systems
Launch an ASSM GUI for all FS1 Flash Storage Systems
5. What is
"staging" in the context of performing a software update on a FS1
Flash Storage System?
Moving the software package from a temporary directory to
its permanent directory
What is "staging" in the context of performing a
software update on a FS1 Flash Storage System?
Converting the downloaded software into the proper format
for installing
Loading the software package into the FS1 Flash Storage
System and validating it (*)
6. Which two (2)
pieces of information are displayed in the Status Bar of the Oracle FS1 System
Manager? (Select two)
Number of users logged in (*)
Time Zone
System status (*)
Storage utilization
7. Which two (2)
statements concerning Storage Domains are true? (Select 2)
A LUN can be assigned to both a Volume Group and a Storage
Domain. (*)
A Volume Group may span Storage Domains. (*)
A LUN can be assigned to a Storage Domain but not to a
Volume Group.
A Volume Group may not span Storage Domains.
A LUN can be assigned to a Volume Group but not to a Storage
Domain.
8. When performing
Guided Maintenance, which of the following statements is not a recommended
precaution?
Never manually turn off power to a component. (*)
Ignore System Alerts until after Guided Maintenance has been
completed.
Do not exit Guided Maintenance without performing all the
steps in the wizard.
Always remove the selected FRU, even if only testing the
replacement procedure.
9. Which statement is true concerning growing an existing
volume?
Available capacity must exist within the assigned Storage
Class. (*)
Thin Provisioning will allow growth across multiple Storage
Classes. (*)
The assigned storage class must be changed.
A new volume of larger capacity must be created to which the
existing volume must be migrated.
10. What are the
severities by which events can be filtered?
Emergency, Warning, Informational
Critical, Error, Warning, Informational
Emergency; Critical, Warning, Informational
Critical, Warning, Informational (*)
11. Which three
(3) statements about a Copy LUN are true? (Select three)
Its creation is instantaneous.
It requires cache equal to 5-10% of the size of the original
LUN.
It consumes as much disk space as the original LUN. (*)
It is readable and writable. (*)
Its initial QoS settings may be different than the original
LUN. (*)
12. Which
statement best describes the performance of MaxRep 3.0?
Provides a 10x throughput increase as compared to the prior
generation of MaxRep Engines
Provides a 1.5x throughput increase as compared to the prior
generation of MaxRep Engines
Provides a 2x throughput increase as compared to the prior
generation of MaxRep Engines (*)
Equals the performance of the prior generation of MaxRep
Engines
13. Which of the following uses is not a suggested use of Storage Domains?
Application I/O isolation
Migrate data off legacy storage
Protocol (FC, iSCSI, NAS) separation
Segregate data based on operating system type (*)
14. What is a
benefit of using iSCSI SAN instead of Fibre Channel SAN?
Better performance
Lower cost (*)
Less host system resources are used
Reduced administration
15. What 2 reasons
show why a customer would implement Storage Domains? (Choose all correct
answers)
Enable WORM on an archive
Meet regulatory mandates (*)
Speed application deployment
Meet security objectives (*)
16. Select the
profile attribute that does not fit for Double Down on the Database with FS1
Applications that require 1 second, or less, failover
Oracle Database 11gR2 upgrades and/or moving to 12c
(Mostly) NAS
environments (*)
E-Business Suite, JD Edwards, PeopleSoft, Essbase, OLAP, and
Business Analytics customers
17. Select the
correct advantage for the following architectural differentiator: Flash
Optimized
Keep business up with features like: Sub-second failover,
T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS
Automated and optimized provisioning & QoS PLUS settings
with just one click for OLTP, DW, ERP, CRM, etc
Can be used to isolate multiple database files, logs, and/or
data to optimize performance and Secure multi-tenancy deployments
The first flash storage system that automatically addresses
application workload skew (access to blocks in a LUN is skewed to just a few
blocks): busiest blocks on fastest tier of storage based on usage and business
importance
Multiple types of flash media options for different access
patterns (*)
18. Which
statement correctly describes Recovery Point Objective (RPO)?
The period of time from which you can recover replicated
data
Continuous data protection product offered by EMC which
supports data replication of block-based storage.
Describes the acceptable amount of data loss measured in
time (*)
Describes the acceptable amount of time to recover from
downtime
19. In the status
bar, what does a yellow triangle icon containing an exclamation point indicate?
A component of the FS1 has generated an error but has not
failed.
A component of the FS1 Storage System is in a state of
failure.
System utilization is nearing the upper threshold.
There is a System Alert. (*)
20. Which
statement is true in a "Standard" redundancy QoS configuration?
The FS1 is able to survive the loss of one Disk Enclosure.
The FS1 utilizes one mirrored copy of the data.
Stores original data and multiple mirrored copies.
Stores original data only. (*)
21. What does
SAN/NAS biasing control?
FCP Framing Priority
QoS Level
CIFS Connection Count
Cache Allocation (*)
NFS Access Frequency
22. What steps are
performed during a FS1 software update?
Download, Validate, Upload, Install
Download, Stage, Upload, Install
Download, Stage, Install (*)
Download, Upload, Stage, Instal
23. What are
condition that must be met before a new Storage Domain can be created?
There must be at least one Disk Enclosure that contains no
volumes. (*)
You must be logged into the FS1 support account.
A Storage Profile must exist for setting the Storage Domain
QoS parameters.
A Storage Domain license must be installed.
24. Select the
correct advantage for the following architectural differentiator: QoS PLUS -
Business Driven Auto-tiering
Can be used to isolate multiple database files, logs, and/or
data to optimize performance and Secure multi-tenancy deployments
Multiple types of flash media options for different access
patterns
Keep business up with features like: Sub-second failover,
T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS
The first flash storage system that automatically addresses
application workload skew (access to blocks in a LUN is skewed to just a few
blocks): busiest blocks on fastest tier of storage based on usage and business
importance (*)
Automated and optimized provisioning & QoS PLUS settings
with just one click for OLTP, DW, ERP, CRM, etc
25. How do
customers typically manage their aged SAN infrastructure?
Switch Ethernet
Add more lubricant
Build their own
Go with "sketchy" and expensive 3rd-party support
after EOSL (*)
26. By default,
how many consecutive failed login attempts will result in a FS1 account being
locked? 3
10
2
5 (*)
27. What does it
mean when a host is shown as "Hostname Unknown" in the "SAN
-> Hosts" window of the Oracle FS1 System Manager?
It has an HBA port conflict that needs to be resolved.
It is referenced by the World Wide Number of its Host Bus
Adapter. (*)
It needs to be rebooted before the FS1 will register its
name.
It is not available for storage provisioning.
28. What is the
minimum number of people needed to safely when moving a loaded FS1-2 Racked-Mounted
System?
3 (*)
4
2
1
29. Select the
correct advantage for the following architectural differentiator: Application
Profiles
Can be used to isolate multiple database files, logs, and/or
data to optimize performance and Secure multi-tenancy deployments
Automated and optimized provisioning & QoS PLUS settings
with just one click for OLTP, DW, ERP, CRM, etc (*)
The first flash storage system that automatically addresses
application workload skew (access to blocks in a LUN is skewed to just a few
blocks): busiest blocks on fastest tier of storage based on usage and business
importance
Keep business up with features like: Sub-second failover,
T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS
Multiple types of flash media options for different access
patterns
30. How many IP addresses
are required to configure a Pilot?
2
4
3 (*)
1
31. Which type of
media supports up to 3 RAID Groups in a single disk enclosure?
400 GB SSD's
900 GB HDD's
300 GB HDD's
4 TB HDD's
1.6 TB SSD's (*)
32. What is a
benefit of using Thin Provisioning?
Increased Disk performance
Reduced CPU and RAM utilization
Increased Controller performance
Improved utilization of disk storage (*)
33. What is the function of a Storage Profile?
It determines the amount of storage allocated to the volume,
based on the application using the volume.
It determines the number of disk Enclosures that the volume
will be striped across, and the stripe size.
It specifies thresholds which, when exceeded, may
automatically initiate the copy of an underperforming volume to higher
performance storage.
It specifies a set of QoS attributes used to optimize a
logical volume for a specific application or task. (*)
34. Select the
correct advantage for the following architectural differentiator: Storage
Domains
Multiple types of flash media options for different access
patterns
Keep business up with features like: Sub-second failover,
T10PI, WARMstart error containment, No SPOF, pre-emptive copy and BCSS
The first flash storage system that automatically addresses
application workload skew (access to blocks in a LUN is skewed to just a few
blocks): busiest blocks on fastest tier of storage based on usage and business
importance
Automated and optimized provisioning & QoS PLUS settings
with just one click for OLTP, DW, ERP, CRM, etc
Can be used to isolate multiple database files, logs, and/or
data to optimize performance and Secure multi-tenancy deployments (*)
35. What is a
Storage Domain?
A feature by which the Disks can be segmented to create
discrete storage pools (*)
A grouping of selected RAID groups allowing the
configuration of virtual FS1 systems
A logical entity by which LUNs and filesystems can be
grouped and dedicated to a specific purpose
A feature by which a specific class of storage can be
dedicated to selected Controller
36. When there are
multiple Power Distribution Units (PDUs) in a rack, they must all be powered on
within how many seconds?
30
15
10 (*)
20
37. Which statements
about an update are true?
Cannot be scheduled, is usually non-disruptive, cannot be
monitored
Cannot be scheduled, is usually non-disruptive, can be monitored
Can be scheduled, is usually non-disruptive, can be
monitored (*)
Can be scheduled, is disruptive, can be monitored
38. What three (3)
types of information can be contained in a FS1 log bundle? (Select 3)
Performance and usage information (*)
FS1 host topology information
SAN host information (*)
System configuration information (*)
Volume Group configuration and performance information
39. What must be
done within the Oracle FS1 System Manager to configure an SNMP trap?
Create an Email Alert and select the SNMP category.
Create an SNMP Host. (*)
Create a Reporting Schedule that enables SNMP traps.
Create an Event Notification.
40. How is Guided
Maintenance initiated?
Via FS1's Customer Support Center
Via the Oracle FS1 System Manager (*)
Via the pdscli only
Via the fscli only
41. What are the
four navigation tabs in the Oracle FS1 System Manager?
System, Reporting, Health, Protect
System, Monitor, Protect, Support
System, SAN, NAS, Support (*)
Configure, Monitor, System, Health
42. What is the
function of a Storage Profile?
It determines which Background Copy Priority will be used.
It specifies thresholds which, when exceeded, may
automatically initiate the copy of an underperforming volume to higher
performance storage.
It specifies a set of QoS attributes used to optimize a
logical volume for a specific application or task. (*)
It determines the amount of storage allocated to the volume
based on the application using the volume.
43. Which of the
following methods is not a recommended method of sending a log bundle tar file
to FS1's customer support center?
Via the Call-Home server
Via email to FS1's customer support address (*)
Via FS1's customer support portal
Via FS1's FTP site
44. For MaxRep,
where does the Write Splitter reside?
On FS1 (*)
On the host
On VMAX
On the MaxRep Engine
45. What is the
function of the PMI?
FC data connection between Controllers and Disk Enclosures
Write cache primary mirror path
RAID controller failover path
Management, configuration, and monitoring (*)
46. On a capacity
basis, expressed as a percentage, how much more space is used by RAID 6 vs.
RAID 5?
0 (*)
0.12125
0.1
0.15
47. On the status
bar of the Oracle FS1 System Manager, how is a "warning" condition
indicated?
Faulty component is displayed in bold and will be flashing
Flashing yellow dot in the lower left corner of the window
Amber triangle in the lower left corner of the window (*)
Red dot in the lower left corner of the window
48. Which three
(3) pieces of statistical data can be displayed in a LUN Trending chart?
(Select 3)
Volume Logical Capacity
Volume Allocated Capacity (*)
Cumulative Writes (MB) (*)
IOPS/second per Disk
IOPS/second per LUN (*)
49. What three (3)
functions can be performed after connecting to the IP address or hostname of
the FS1 via a web browser? (Select 3)
Download the ASSM software (*)
Perform a warm restart of the FS1
Log in to the FS1 host
Download the FSCLI.exe (*)
View FS1 documentation (*)
50. What are three
(3) features of the FS1 Path Manager? (Select three)
Load balancing (*)
Increased throughput
Path failure detection (*)
Failed component detection
Automatic failback (*)
51. What is LUN
mapping?
The assigning of specific tracks of one or more disks to a
LUN
The assigning of a LUN to one or more specific Controller FC
ports
The assigning of a LUN to specific hosts (*)
The assigning of a LUN to a specific IP address
52. From where is
the Oracle FS1 System Manager software available for download to the local
host?
From a web browser, by specifying the name or IP address of
the FS1 Storage. (*)
Via FTP from the FS1 Customer Support portal.
From the MaxMan user interface, by clicking the
"Download ASSM GUI" link under the Support tab.
From a web browser, under "Software", on the FS1
Customer Support portal. (*)
53. How many Disk
Enclosures may be attached to a SAS back end string?
8
6
4
20 or 30
5 (*)
54. What are three
(3) parameters that are configurable only when creating an Advanced Storage
Profile? (Select 3)
Number of RAID groups (*)
Strip size (*)
Redundancy
Disk Protection (*)
Preferred Storage Classes
55. When creating
a LUN, what type(s) of organizational units can it be assigned to?
Volume Group, Clone LUN Group and Storage Domain
Volume Group and Storage Domain (*)
Storage Domain only
Volume Group only
56. How much total
cache is in a FS1-2 system?
208
80
416 (*)
192
384
57. What is a Copy
LUN?
A point-in-time copy of a LUN which utilizes less disk space
than the original LUN
A block-level copy of a LUN which utilizes less disk space
than the original LUN
A point-to-time copy of a LUN which utilizes the same amount
of disk space as the original LUN
A block-level copy of a LUN which utilizes the same amount
of disk space as the original LUN (*)
58. Which two (2)
statements concerning the FS1 MaxMan GUI are true? (Select two)
It is used for monitoring one or more FS1s. (*)
It is used for monitoring and managing a group heterogeneous
storage systems.
It is installed separately from the Oracle FS1 System Manager
via a separate download from the Pilot.
It opens the appropriate Oracle FS1 System Manager window to
allow configuration. (*)
59. What is the
maximum number of Administrator accounts that may be created?
23 (*)
10
5
17
60. Which document
should be consulted for detailed instructions for installing connecting
brackets and plates?
FS1 Flash Storage System Advanced Hardware Installation
Guide (*)
FS1 Flash Storage System Administrator's Guide
FS1 Flash Storage System Support and Interoperability Guide
FS1 Flash Storage System Service Guide
6. When performing
Guided Maintenance, what does the Identify button do?
Displays in the Oracle FS1 System Manager the serial number
of the faulty component
Forces LEDs of the faulty component to display red
Displays in the Oracle FS1 System Manager the rack location
of the faulty component
Blinks LEDs on all non-faulty components (*)
10. From where is
the Oracle FS1 System Manager software available for download to the local host?
Via FTP from the FS1 Customer Support portal.
From a web browser, under "Software", on the FS1
Customer Support portal. (*)
From a web browser, by specifying the name or IP address of
the FS1 Storage. (*)
From the MaxMan user interface, by clicking the
"Download ASSM GUI" link under the Support tab.
14. Which two (2)
statements concerning Storage Domains are true? (Select 2)
A Volume Group may span Storage Domains. (*)
A LUN can be assigned to a Volume Group but not to a Storage
Domain.
A Volume Group may not span Storage Domains.
A LUN can be assigned to both a Volume Group and a Storage
Domain. (*)
A LUN can be assigned to a Storage Domain but not to a Volume
Group.
18. How is storage
assigned to a Storage Domain?
By Volume (*)
By RAID group
By Disk Enclosure (*)
By Storage Class
19. The FS1 has
the fasted failover in the portfolio at:
<1 minute="" o:p="">
<5 o:p="" seconds="">
<1 o:p="" second="">
<10 o:p="" seconds="">
49. Which setting
cannot be configured via the Network Settings page in the Oracle FS1 System
Manager?
IP addresses of Pilot control units
IP addresses for the Controllers' control units (*)
DHCP server
DNS server
54. Which two (2)
port connection protocols are available via a SAN Generation 3 Network
Interface Module (NIM)? (Select two)
iFCP
Fibre Channel (*)
SCSI
iSCSI (*)
56. Which types of
disk drives are available for use in a FS1 Flash Storage System?
SAS, SSD (*)
IDE, SATA, SSD
SATA, Fibre Channel, SAS, SCSI
SSD, PATA, Fibre Channel
Comments
Post a Comment